 |
Instrumentation Geo-Technical Softwares: Print This Page |
|
| Manufacturer/Principal :- |
| Geo-Slope International, Canada |
|
| Product |
| Software tools for Geo-technical solutions |
|
| Geo-Slope develops, and supports stat-of-the art CAD software for geo-technical and geo-environmental modeling. The objective is to create software that is both technically comprehensive and easy to use, making geo-technical modeling accessible and practical for all geo-technical engineers |
|
SLOPE/W  |
| Slope/W is a software product for computing the factor of safety of earth and rock slopes. With Slope/W you can analyze both simple and complex problems using one of eight limit equilibrium methods for a variety of slip surface shapes, pore-water pressure conditions, soil properties and concentrated loads. You can use finite element computed pore-water pressure, static stresses, or dynamic stresses in your slope stability analyses. You can also perform probabilistic analyses. |
|
| SEEP/W |
| Seep/W is a software product for analyzing groundwater seepage and excess pore water pressure dissipation problems. We Seep/W you can consider analyses ranging from simple saturated steady state problems to sophisticated saturated/ unsaturated time dependent problems. |
|
| SIGMA/W |
| Sigma/W is a finite element software product for analyzing geotechnical stress and deformation problems. With Sigma/W, you can consider analyses ranging from simple deformation problems to advanced effective stress problems with staged applied loading using constitutive soil models such as linear-elastic, anisotropic linear-elastic, nonlinear –elastic(hyperbolic), elastic plastic or Cam-Clay. |
|
| QUAKE/W |
| Quake/W is a finite element software product for the dynamic analyses of earth structures subjected to earthquake shaking. Using Quake/w, you can analze the dynamic behavior of earth embankment dams, natural soil and rock slopes, and any natural , near horizontal ground sites with potential for excess pore-water pressure generation during earthquake shaking. |
|
| TEMP/W |
| Temp/W is a finite element software product for analyzing geothermal problems. Using Temp/W, you can analyze steady-state thermal conduction problems and transient freeze thaw problems. You can control the rate at which latent heat is absorbed or released due to ice-water phase change. Thermal boundry conditions can be determined from imported climate data; boundry conditions are provided for thermo-syphons and freeze pipes. |
|
| CTRAN/W |
| Ctran/W is a finite element software product that is used in conjunction with Seep/W to model contaminant transport Ctran/W can analyze problems as simple as tracking particles in response to the movement of water or as complex as analyzing processes involving diffusion, dispersion, adsorption,, radioactive decay and density contrasts. |
|
| VADOSE/W |
| Vadose/W is a finite element software product linking the environment, ground water surface, vadose zone, and local groundwater regime. It can analyze flux boundary problems such as |
 |
Design and performance monitoring of single or multi-layered soil covers over mine and municipal waste facilities. |
|
Determine climate controlled pore-water pressure distributions on natural slopes for use in stability analyses |
|
Determining infiltration, evaporation and transportation from agricultural or irrigation projects. |
|
|
| SEEP3D/W |
| Seep3D/W brings the power of interactive 3D design to the world of saturated / unsaturated ground water modeling. Using Seep3D/W, you can extend your analyses of regional groundwater flow to include specific structural geometry such as reservoirs and dams, flow cut-off barriers, individual seepage drains or wells, combination of side and down-slope flows, and infiltration and flow in waste barrier systems. |
|
)
)
)
)
)
)
)
)