Instrumentation Geo-Technical Softwares

Manufacturer/Principal :-
Geo-Slope International, Canada

Products
Software tools for Geo-technical solutions

Geo-Slope develops, and supports stat-of-the art CAD software for geo-technical and geo-environmental modeling. The objective is to create software that is both technically comprehensive and easy to use, making geo-technical modeling accessible and practical for all geo-technical engineers

SLOPE/W 
Slope/W is a software product for computing the factor of safety of earth and rock slopes. With Slope/W you can analyze both simple and complex problems using one of eight limit equilibrium methods for a variety of slip surface shapes, pore-water pressure conditions, soil properties and concentrated loads. You can use finite element computed pore-water pressure, static stresses, or dynamic stresses in your slope stability analyses. You can also perform probabilistic analyses.

SEEP/W 
Seep/W is a software product for analyzing groundwater seepage and excess pore water pressure dissipation problems. We Seep/W you can consider analyses ranging from simple saturated steady state problems to sophisticated saturated/ unsaturated time dependent problems.

SIGMA/W 
Sigma/W is a finite element software product for analyzing geotechnical stress and deformation problems. With Sigma/W, you can consider analyses ranging from simple deformation problems to advanced effective stress problems with staged applied loading using constitutive soil models such as linear-elastic, anisotropic linear-elastic, nonlinear –elastic(hyperbolic), elastic plastic or Cam-Clay.

Quake/W 
Quake/W is a finite element software product for the dynamic analyses of earth structures subjected to earthquake shaking. Using Quake/w, you can analze the dynamic behavior of earth embankment dams, natural soil and rock slopes, and any natural , near horizontal ground sites with potential for excess pore-water pressure generation during earthquake shaking.

Temp/W 
Temp/W is a finite element software product for analyzing geothermal problems. Using Temp/W, you can analyze steady-state thermal conduction problems and transient freeze thaw problems. You can control the rate at which latent heat is absorbed or released due to ice-water phase change. Thermal boundry conditions can be determined from imported climate data; boundry conditions are provided for thermo-syphons and freeze pipes.

Ctran/W 
Ctran/W is a finite element software product that is used in conjunction with Seep/W to model contaminant transport Ctran/W can analyze problems as simple as tracking particles in response to the movement of water or as complex as analyzing processes involving diffusion, dispersion, adsorption,, radioactive decay and density contrasts.

Vadose/W  
Vadose/W is a finite element software product linking the environment, ground water surface, vadose zone, and local groundwater regime. It can analyze flux boundary problems such as

• Design and performance monitoring of single or multi-layered soil covers over mine and municipal waste facilities.
• Determine climate controlled pore-water pressure distributions on natural slopes for use in stability analyses
• Determining infiltration, evaporation and transportation from agricultural or irrigation projects.

Seep3D/W 
Seep3D/W brings the power of interactive 3D design to the world of saturated / unsaturated ground water modeling. Using Seep3D/W, you can extend your analyses of regional groundwater flow to include specific structural geometry such as reservoirs and dams, flow cut-off barriers, individual seepage drains or wells, combination of side and down-slope flows, and infiltration and flow in waste barrier systems.